Frigid Home? Simple Checks Can Get The Heat Working Again
As the winter chill sets in, the last thing you want is your furnace not blowing hot air, leaving your home feeling more like a refrigerator than a cozy retreat. Walking into a cold home on a frigid winter day can be miserable. If your furnace or heat pump isn’t blowing hot air like it should, the resulting chill is more than uncomfortable – it can even become dangerous if temperatures drop low enough.
Before calling in the heating and air conditioning pros for furnace repair, there are a few quick troubleshooting steps you can take to get your home heating system back up and running quickly. Many furnace problems that prevent hot air from circulating in your home have simple solutions that don’t require professional HVAC service right away. With some basic furnace maintenance and troubleshooting, you may be able to get your home warm again without waiting or paying for a service appointment.
Key To Understanding the Heart of the Problem
Before diving into the fixes, it’s crucial to understand why your furnace might be acting more like an air conditioner, pushing out cool air instead of warm. Common culprits include a misconfigured thermostat setting, a dirty air filter, or more technical furnace issues like an ignition or power supply problem. These issues can turn your cozy haven into a cold, unwelcoming space. Here are 5 quick and easy fixes if your furnace is not blowing hot air in your house.
5 Easy Fixes For A Furnace Not Blowing Hot Air
Quick Fix #1: Check Your Thermostat Settings
It might sound basic, but the first and easiest fix is to check your thermostat settings. Make sure the thermostat is set to “heat” mode and the temperature is higher than the current ambient room temperature. The furnace won’t turn on if the thermostat isn’t actively calling for heat. While inspecting the thermostat, also replace weak batteries, as this can prevent the HVAC system from receiving the signal to start heating. Having a programmable smart thermostat allows for more control and optimization of indoor air quality and energy efficiency. Consider upgrading from an old or basic model if needed.
Quick Fix #2: Replace or Clean Your Air Filter
A clogged filter or dirty air filter is one of the most common reasons a furnace won’t blow hot air properly. Airflow is critical for allowing the system to heat up correctly. Turn off the power and inspect your filter. If it appears clogged or covered in dust and debris, replace it right away with a new, clean filter. For optimal HVAC system performance, use air filters with a MERV rating of 8-12. You should change your furnace filter every 1-3 months to prevent restricted airflow. Make a schedule or calendar reminders so you remember this important maintenance task or schedule a furnace tune-up with a reputable, nearby HVAC repair company. Also, keep spare air filters on hand for easy swapping when needed.
Quick Fix #3: Relight the Pilot Light or Check the Ignition System
A common issue when your furnace is blowing cold air is a pilot light that’s gone out or an ignition system in need of attention. If you’re feeling lukewarm air instead of the cozy warmth you expect, it’s time to inspect the pilot light or ignition system of your furnace or water heater. This fix, often a simple task, can be the key to reigniting the warmth in your home. Remember, while relighting a pilot light is generally straightforward, ensuring the system’s safety and efficiency is paramount. If in doubt, consulting a local heating and air conditioning repair company can provide peace of mind and guarantee that your heating system operates at its best.
Quick Fix #4: Ensure Power Supply and Circuit Functionality
It’s important to verify that the furnace is actually receiving power. Check the circuit breaker and reset it if tripped. Ensure the shut-off switch located on or near the furnace is in the “On” position. Confirm the gas valve is open and receiving fuel if it’s a gas furnace. Inspect the exhaust vent and inducer fan for blockages. If the blower and other components have power but the furnace still isn’t igniting or producing warm air flow, an HVAC repair technician will need to assess the gas valve, hot surface ignitor, and control board. Never attempt to diagnose or repair gas furnace electrical issues yourself due to the risk of shock. Call a professional immediately for emergency HVAC repair.
Quick Fix #5: Inspect and Clean Blower Components
The blower and fan are critical for circulating heated air. Listen for any odd noises like squealing, rattling, or humming when the furnace runs. This could signal that your furnace is not working properly. Turn off the power before inspecting the blower assembly. Lubricate the motor with a drop of oil if needed to quiet the bearings. Look for debris buildup on the blower and fan blades and clean gently with a brush. Check that the blower belt is tight and not cracked or worn. A loose, broken, or slipping belt can prevent proper airflow. If the blower motor needs repair or replacement, call a professional immediately. Do not attempt this yourself due to electrical hazards.
When to Call An HVAC Professional For A Furnace Not Kicking On When Temp Drops
While DIY fixes can resolve minor issues, certain furnace problems require the expertise of a professional HVAC technician. If your furnace continues blowing cold air after checking the gas supply and thermostat settings, or if you have an electric furnace displaying error codes, it’s time to seek professional help. Complex issues, such as irregular furnace cycling or a malfunctioning heat exchanger, not only impact comfort but can also pose safety risks. Recognizing when to call an HVAC professional is crucial for homeowners aiming to ensure the longevity of their system and the safety and comfort of their living space.
Dealing with a furnace blowing cold air can be frustrating, especially during the cold months. However, with these five quick fixes, you might be able to tackle the issue head-on and restore the much-needed warmth to your home. Remember, while some issues are easy to fix, others might require the expertise of a trained professional. Don’t hesitate to reach out to a top-rated local HVAC company for reliable heater and furnace repair, service, and furnace installation.
In need of a professional to fix a furnace not blowing hot air? If you live in Decatur, McDonough, Atlanta, or the surrounding areas of Georgia, contact My Aire Heating and Cooling at 770-818-6095 for prompt and reliable service, ensuring your home stays warm and comfortable all season long.
Please note that this blog post is for informational purposes only and does not replace professional advice. Always consult with a qualified HVAC technician for any heating issues.
As a leading HVAC company in the Metro and South Metro Atlanta area, the team at My Aire Heating and Cooling is thrilled to be sharing our expertise and knowledge through our company HVAC blog. Our team of experienced NATE-Certified HVAC technicians is committed to providing top-notch heating and cooling services to our customers. We believe in the importance of educating people on how to properly troubleshoot and maintain their HVAC systems to ensure they are running efficiently and effectively. Our goal is to help our customers achieve optimal indoor comfort all year round.